GMC C/K Series Pickup Off Road Lights

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Jerry, the install of the Aries Bull Bar part #AAB35-4015 do require you to permanently remove the tow hooks to install. It looks like the similar Westin Ultimate Bull Bar part #32-3645 does allow you to keep them though.

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

For your Dometic DuoTherm the Advent Air Unit part #ACDOM150 would be your best option that will give you the higher BTU rating 15k and easily connects to the current wiring you have now.

Hey Peter you are right that the Opti-Brite LED Strip Light #OPT32ER does require its own separate switch. For that you could use really any on/off switch, my suggestion is the Single Rocker Switch #37212585 and the faceplate #37212845. If you are…

Because the 8-14.5 tire that you've got sits on a 14.5" wheel, so you wouldn't be able to switch tire sizes with anything that we have…

We have a similar etrailer hitch that fits your 2021 Ram 1500 Classic with the part #e98852, but the #e28ZR fits the non-Classic models.

You are correct the hook ups are for the lights on the Blazer LED Cube Light Kit #BL28VR. The different ratings are for each of the circuits. The lights that come with the kit will fit onto the smaller connections allowing you to connect more…

The easiest to use and highest quality base plate kit that fits your 2023 Jeep Gladiator is the Blue Ox part #BLU53FR which would work great with a tow bar like the #BX7420. We do have custom fit lighting solutions like the Curt part #C96JR that…

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR can be used with your LEDs, the only caveat is that if your Jeep has ParkSense proximity sensors then you'd need to use the Roadmaster 4-Diode…

Yes, we have the Curt tow bar wiring kit part #C96JR that is a confirmed fit for your 24 Wrangler. This installs by plugging inline with your taillight connectors which means it does not need any splicing.